Showing 1–16 of 48 results
The 2×10 DA G2 analog audio distribution amplifier is equipped with a stereo line level high-Z input, which accepts either a balanced (+4 dBu) or unbalanced (-10 dBV) source and has five active balanced low-Z stereo output amplifiers. It improves on the original 2×10 DA design by adding signal bypass relays which passively route the input to output one in the event of power loss, and a second power jack for an optional second redundant power supply.
The 2×16 DA/RJ G2 analog stereo RJ45 audio distribution amplifier is equipped with a stereo line level high-Z inputs, which accepts either a balanced RJ45 (+4 dBu) or an unbalanced RCA (-10 dBV) source with eight active balanced low-Z stereo output amplifiers.
The ACS 4.4 G2 provides matrix audio switching of 4 stereo inputs to 4 stereo outputs. Matrix switching allows any/or all inputs to be assigned to any/or all outputs. The ACS 4.4 G2 may be controlled via its front panel rotary encoder control knob and TAKE switch, contact closures, open collectors, logic and/or the multi-drop RS-232 serial port (USB or Ethernet optional). Installation is simplified with RJ45 audio jacks for input and output connections and plug-in euroblock screw terminal connectors for expansion and remote control.
The ACS 8.2 Plus provides matrix audio switching of 8 stereo inputs to 2 stereo plus 2 mono outputs. Any input assigned to output one has fading capabilities. Matrix switching allows any/or all inputs to be assigned to any/or all outputs. The ACS 8.2 Plus may be controlled via front panel switches, contact closures, 5-volt TTL/CMOS logic and/or the multi-drop RS-232 serial port (control via USB or Ethernet with optional devices). Installation is simplified with plug-in euroblock screw terminals.
The ADC-1 Plus is a professional quality 24-bit analog-to-digital audio converter. If features balanced stereo XLR inputs and XLR AES output.
The ADMS 44.22 G2 provides low-latency matrix audio switching of 4 RJ45 analog inputs, 4 XLR AES inputs, 2 RJ45 analog outputs, 2 XLR AES outputs. Matrix switching allows any/or all inputs to be assigned to any/or all outputs. The ADMS 44.22 G2 may be controlled via its front panel push-button controls, contact closures, open collectors, logic, multi-drop RS-232 serial and/or TCP/UDP Ethernet commands. Installation is simplified with RJ45 audio jacks for analog input and output connections, XLR jacks for digital input and output connections, and plug-in euroblock screw terminal connectors for remote control.
The AES Audio Sentinel® 4 >> Web is a web-enabled four channel AES/EBU digital audio silence monitor. Each of the four AES inputs can be configured for silence, stereo out of phase, and AES error monitoring. Inputs may be configured to act as two separate mono channels, allowing the user to monitor up to a total of eight different mono audio sources.
The AES Audio Sentinel®+» Web is a web-enabled two channel AES/EBU silence monitor combined with an integrated 2×1 switcher. It is designed to monitor two AES audio sources, one primary, the other back-up. When silence is detected on the primary input it can automatically switch to the back-up input via mechanical latching relays. It features a browser-based HTML5 web interface and supports SSL/TLS email (Gmail, etc.), SMS-email notification, as well as SNMP.
The AES DA 1×6, six XLR output, one-input AES/EBU distribution amplifier is ideal for distributing AES/EBU signals or wordclock. It features dual (2x) power input jacks to allow for redundant power with an optional second power supply.
The AES DA 2×4 RJ, eight output, two-input AES/EBU distribution amplifier is ideal for distributing AES/EBU signals or word clock at sample rates of up to 96kHz. It can be configured for 2×4 operation, acting as two separate one input, four output DAs, or for 1×8 operation acting as a one input eight output DA.
The AES DA 2×4/1×8 G2 Term, eight output, two-input AES/EBU distribution amplifier is ideal for distributing AES/EBU signals or word clock at sample rates of up to 96kHz. It can be configured for 2×4 operation, acting as two separate one input, four output DAs, or for 1×8 operation acting as a one input eight output DA.
The AES Switcher Sentinel 4 XLR is a web-enabled, zero latency, transparent four input, one output switcher/router with mechanical latching relays designed to pass AES/EBU digital audio. The AES Switcher Sentinel 4 XLR is perfect for passive AES signal switching via front panel controls, web browser controls, contact closures, TCP commands, and SNMP.
The AES Switcher Sentinel 2+1 is a web-enabled three channel AES/EBU silence monitor combined with an integrated 3×1 AES switcher. It is designed to monitor two AES audio sources and one analog to digital (ADC) audio source. When silence is detected on the primary input it can automatically switch to the back-up AES input or the backup ADC input via mechanical latching relays. It features a browser-based HTML5 web interface and supports SSL/TLS email (Gmail, etc.), SMS-email notification, as well as SNMP.
The Broadcast Tools Alert Sentinel 2 is a two station stereo analog switcher/monitor designed to allow the insertion of alert audio into broadcast program signal paths following in the footsteps of the Broadcast Tools STA-III WX. Perfect for remote weather alerts, remote broadcasts, or live sports.
The Audio Sentinel®+» Web/RJ is Broadcast Tools’ next-generation web-enabled two channel stereo silence and phase monitor with an integrated, transparent, 2×1 switcher. It is designed to monitor two analog audio sources, one primary, the other back-up. When silence is detected on the primary input it can automatically switch to the back-up input via mechanical latching relays. It includes a browser-based HTML5 web interface and supports SSL/TLS email (Gmail, etc.), SMS-email notification, as well as SNMP. Its audio I/O features pluggable screw terminal-blocks and standard RJ45 audio jacks wired in parallel for ease of wiring.