Showing 1–16 of 197 results

16.1 – Switcher/Router

The 16×1, Sixteen input, Single Output Stereo Switcher/Router passively switches or routes any one of 16 stereo inputs to one stereo output or vise-versa through gold contact relays.

2×16 DA/RJ – RJ45 Analog Distribution Amplifier

The 2×16 DA/RJ analog stereo distribution amplifier is configurable for stereo (2×8) or monaural (1×16) output via internal jumpers. It is equipped with a stereo line level high-Z input, which accepts either a balanced RJ45 (+4 dBu) or unbalanced RCA (-10 dBV) source with eight active balanced low-Z stereo output amplifiers.

2×10 DA – Analog Distribution Amplifier

The 2×10 DA analog distribution amplifier is configurable for stereo (2×5) or monaural (1×10) output via internal jumpers. It is equipped with a stereo line level high-Z input, which accepts either a balanced (+4 dBu) or unbalanced (-10 dBV) source and has five active balanced low-Z stereo output amplifiers.

2×6 DA Plus/Term – Analog Distribution Amplifier

The 2×6 DA Plus analog distribution amplifier is configurable for stereo (2×3) or monaural (1×6) output via internal jumpers. It is equipped with a stereo line level high-Z input, which accepts either a balanced (+4 dBu) or unbalanced (-10 dBV) source and has three active balanced low-Z stereo output amplifiers.

ACS 16.2 – Analog Stereo Matrix Switcher

The ACS 16.2 provides matrix audio switching of 16 stereo inputs to two stereo outputs. Matrix switching allows any/or all inputs to be assigned to any/or all outputs with inputs one and two having fade and dim capabilities. The ACS 16.2 may be controlled via front panel channel selection knob and take push button, contact closures, open collectors, logic and/or the multi-drop RS-232 serial port. Installation is simplified with plug-in euroblock screw terminals.

ACS 4.1 – Analog Stereo Matrix Switcher

The ACS 4.1 provides matrix audio switching of 4 stereo inputs to one stereo output. Matrix switching allows any/or all inputs to be assigned to one output. The ACS 4.1 may be controlled via front panel switches, contact closures, logic and/or the multi-drop RS-232 serial port. Installation is simplified with plug-in euroblock screw terminals.