The Audio Sentinel® 4 >> Web is a web-based four channel stereo/eight mono channel silence monitor. All four stereo inputs are balanced and feature pluggable screw terminal-block and standard RJ45 audio inputs wired in parallel for ease of wiring. Each stereo input can be configured for out of phase monitoring in addition to silence monitor or the input may be configured to act as two separate mono channels, allowing the user to monitor up to a total of eight different mono audio sources.
The Broadcast Tools Box O’ Relays 6 is a six channel optically isolated relay module, following in the footsteps of the original Box O’ Relays 4 from over twelve years ago. The Box O’ Relays 6’s new design is perfect for converting GPO outputs from AoIP systems and other devices to dry contact closures. In addition to six independent relays, the six sections may be configured via dipswitch into three relay pairs for flip-flop (set/reset) operation*.
Need to convert the DB-15 connector to the euroblock removable screw terminals? The Connect O’ Adapter 15 MAX will do the job. The COA-15 MAX is designed to plug into the male 15-pin D-Sub connector on the WW1 IDC “MAX” or StarGuide II/III.
The Broadcast Tools COA-15/RJ is a DB-15M to RJ45 Breakout Adapter used to convert GPIO xNode General Purpose Outputs (GPOs) to an RJ45 connector. The COA-15/RJ also breaks out the GPIO ports 5 GPIs to their own RJ45 jack for ease of installation. Using the COA-15/ RJ, DB-15M to dual RJ45 adapter you can easily interface the GPO output from a GPIO xNode port with the optional Broadcast Tools Box O’ Relays 6 via standard Cat5/6 cabling converting the port’s 5 GPOs to 5 isolated SPDT dry contact closure outputs on pluggable screw terminal block.
Here’s another problem solver from Broadcast Tools for the XDS Pro or StarGuide II/III satellite receivers! The Connect O’ Adapter 37 XDS/RJ provides an effective way to convert a male DB-37 relay connector to four RJ45 jacks that can be connected to the GPI-16 Plus/RJ interface using Cat5 cables.
Here’s another problem solver from Broadcast Tools for the XDS or StarGuide II/III satellite receivers! The Connect-O-Adapter 37 is a DB-37F to terminal block adapter which breaks out all 16 relay outputs and the RS-232 Netcue data (DB-9F) from your satellite receiver.
Need to convert your satellite receiver’s DB-9 audio connector to the euro-block removable screw terminals? The Connect O’ Adapter 9 XDS/MAX will do the job. The COA-9 XDS/MAX is designed to plug into the male 9-pin D-Sub connector on the XDS, WW1 IDC “MAX” or StarGuide II / III satellite receiver and break out the analog and digital audio pins.
Need to convert your satellite receiver’s DB-9 audio connector to the euro-block removable screw terminals? The Connect O’ Pad 2 will do the job. The COP-2 is designed to plug into the male 9-pin D-Sub connector on the XDS, WW1 MAX, NON-Option B SFX, StarGuide II/III satellite receivers and break out the analog and digital audio pins. It allows for analog audio output level adjustments via multi-turn trimmers.
The COP-2/RJ converts a DB-9 connector to a standard pinout RJ45 audio jack and allows for analog audio output level adjustment via multi-turn trimmers. Alternatively, fixed-level AES digital audio switch is selectable. Compatible with XDS, Wegener iPump (Analog Output Only), WW1 MAX, NON-Option B IDC SFX, StarGuide II and Starguide III satellite receivers.
The COP-3 provides an effective way to convert the DB-9 connector to euroblock removable screw terminals and allows for analog audio output level adjustments via multi-turn trimmers. Compatible with Option B SFX Satellite receivers used by NPR.
The DAC-1 is a professional quality 24-bit stereo AES/EBU digital-to-analog audio converter. It features a XLR AES input and balanced analog stereo XLR outputs.
The DTD-16 + G2 is a full-featured DTMF tone/sequence decoder that is user programmable to decode single tones or sequences up to six tones in length which can be assigned to any one of eight SPST normally open relays, eight open collectors and the USB/RS-232 serial ports.
The GPI-16 + G2 interfaces 16 general purpose logic/trigger inputs to a USB serial port or to an RS-232 serial COM port. The user may select from two pre-programmed serial formats; the “PIP” GPI format, which is used on most Broadcast Tools audio switchers, or the legacy AT-1616 format making it perfect for broadcast automation applications.
The GPI-16 + G2 NET interfaces 16 general purpose logic/trigger inputs to a computer’s USB serial port or to an Ethernet Network via TCP or UDP socket connection. The user may select from two pre-programmed serial formats; the “PIP” GPI format, which is used on most Broadcast Tools audio switchers, or the legacy AT-1616 format making it perfect for broadcast automation applications.
The GPI-16 Plus/RJ interfaces 16 general purpose logic inputs to users PC COM or USB port. The user may select from two pre-programmed serial formats; the “PIP” GPI format, which is used on most of Broadcast Tools switcher, or the legacy AT-1616 format. The GPI-16 Plus/RJ has four RJ45 input connectors and can be connected Broadcast Tools COA-37 XDS/RJ adapter using CAT5 cables.
