Showing 33–48 of 55 results

ProMix Hub-6 – IFB/Talkback Hub for ProMix

The ProMix Hub-6 facilitates the switching, mixing and distribution of program, IFB (cue) and talkback audio for any combination of up to six ProMix-1 or ProMix-4 units using Cat5 cable.

RA-1 – 1 RU Rack Shelf

The RA-1 1-RU rack shelf provides mounting for three tri-rack (1/3) or two half-rack (1/2) “Rack-Able” configured products. The RA-1 is pre-drilled for flush and recessed product mounting. The RA-1 is furnished with filler panels and mounting hardware.

Silence Sentinel RJ – Analog Silence Detector

The Silence Sentinel® RJ is designed to monitor any two stereo analog audio sources for silence or an out of phase condition (polarity), generate alarms, and transparently switch to a back-up source using mechanically latching relays.

Silence Sentinel® Basic – Analog Silence Detector

The Silence Sentinel® Basic is a simple stereo/dual mono analog silence sensor designed to monitor any stereo or two independent monaural sources and generate alarms when silence is detected, it does not include an audio switcher.

Site Sentinel® 16 – Web-based Remote Control

The Site Sentinel® 16 is a robust, full-featured, web-enabled sixteen channel remote control featuring a desktop/mobile browser compatible web interface (HTML5.) The system is equipped with 16 metering inputs (0 to 10 VDC), four virtual metering channels, 16 optically-isolated status (logic) inputs, 33 programmable SPDT relays which may be configured for ON, OFF and pulsed operation, four temperature probe inputs, one internal temperature sensor, stereo silence sensor, and power failure input. Includes built-in support for email alarms and SNMP.

Site Sentinel® 4 – Web-based Remote Control

The Site Sentinel® 4 is a robust, full-featured; web-enabled four channel remote control featuring a desktop/mobile browser compatible web interface (HTML5.) The system is equipped with four metering inputs (0 to 10 VDC), 4 optically-isolated status (logic) inputs, 4 programmable SPST relay outputs which may be configured for ON, OFF and pulsed operation, one temperature probe input, stereo silence sensor, and power failure input. Includes built-in support for email alarms and SNMP.

SRC-16 Plus – Serial GPIO Interface

The SRC-16 Plus is connected through an RS-232 or RS-422/485 serial port and can notify your PC software program of GPI/trigger inputs on 16 optically isolated inputs and allows your software to control any of the 16 SPDT, 1-amp relay outputs.

SRC-4 – Serial GPIO Interface

The SRC-4 interfaces four optically isolated GPI/trigger inputs and four SPDT relay outputs to a RS-232 serial port. The SRC-4 can notify a users PC software program that any of four optically isolated trigger inputs have been opened or closed and allows the users software to control four SPDT relay outputs. Communication with the SRC-4 is accomplished via short “burst” type ASCII commands from the users PC.

SS 16.4 – Analog Stereo Matrix Switcher (Special Order)

Available by special order only. The SS 16.4 provides matrix audio switching of 16 stereo inputs to 4 stereo plus 4 monaural outputs. Matrix switching allows any or all inputs to be assigned to any or all of the 4 outputs. The SS 16.4 may be controlled via front panel switches, contact closures, 5-volt TTL/CMOS logic and/or the multi-drop RS-232 or RS-485 serial port. Installation is simplified with removable euro-block screw terminals.

See: ACS 4.4 G2

SS 2.1 MLR/BNC – BNC Switcher/Router

The SS 2.1 MLR/BNC is a transparent two input, dual output switcher/router with mechanical latching relays and BNC connectors. The SS 2.1 MLR/BNC is perfect for composite/MPX or other types of passive signal switching via front panel switches, contact closures and/or serial RS-232.

SS 2.1 MLR/RJ – RJ45 Switcher/Router

The SS 2.1 MLR/RJ is a transparent two input, one output (2×1) switcher/router with mechanical latching relays and RJ45 audio jacks. The SS 2.1 MLR/RJ is perfect for analog or digital RJ45 audio or other types of passive signal switching via front panel switches, contact closures and/or serial RS-232.

SS 2.1 MLR/Term – Terminal Block Switcher/Router

The SS 2.1 MLR/Term is a transparent two input, one output (2×1) switcher/router with mechanical latching relays and pluggable euroblock screw terminals. The SS 2.1 MLR/RJ is perfect for analog or digital audio or other types of passive signal switching via front panel switches, contact closures and/or serial RS-232.

SS 4.1 MLR/RJ – RJ45 Switcher/Router

The SS 4.1 MLR/RJ is a transparent four channel audio switcher/router with mechanical latching relays and RJ45 audio jacks. The SS 4.1 MLR/RJ is perfect for analog or digital RJ45 audio or other types of passive signal switching via front panel switches, contact closures and/or serial RS-232.