Showing 65–80 of 231 results
DAC-1 G2 – Digital Audio Converter
The DAC-1 G2 is a professional quality 24-bit stereo digital-to-analog audio converter. It supports XLR3, BNC, RJ45, and terminal block AES3 digital audio inputs. The AES input is converted to a professional balanced analog stereo audio output on RJ45 and pluggable screw terminal block connectors using a 24-bit digital to analog converter. Sample rates of 32kHz, 44.1kHz or 48kHz are automatically selected based on the detected input source sample rate. The DAC-1 G2 is equipped with an SPST normally open alarm relay that closes when an AES error is detected.
DAS 8.4 – 8 x 4 AES/EBU Digital Audio Switcher
Discontinued. Please see the ADMS 44.22 or the AES Switcher Sentinel 4.
DAS 8.4 Plus – 8 x 4 AES/EBU Digital Audio Switcher
Discontinued. Please see the ADMS44.22 or the AES Switcher Sentinel 4.
DC-8 Plus – Dial-Up Remote Control
Discontinued. Please see Sentinel Products.
DEC-16 – Decoder
Discontinued. Please see the DTD-16.
DMS-III – Digital Monitor Switcher
The Broadcast Tools AES/EBU Digital Monitor & Switcher III is designed to accept and automatically or manually switch two AES/EBU signal sources when a AES digital error and/or analog silence are detected.
DSC-20 – Dual Satellite Controller
Discontinued. Please see the DSC-32/64.
DSC-32/64 – Dual Satellite Channel Controller
Discontinued.
DSD-2 – Dual SubAudible Tone Decoder
Discontinued.
DTD-16 – DTMF Tone Decoder
Discontinued. Please see the DTD-16 Plus.
DTD-16 + G2 – DTMF Decoder w/ Relay Outputs and USB/Serial
The DTD-16 + G2 is a full-featured DTMF tone/sequence decoder that is user programmable to decode single tones or sequences up to six tones in length which can be assigned to any one of eight SPST normally open relays, eight open collectors and the USB/RS-232 serial ports.
DTD-16 + G2 NET – DTMF Decoder w/ Relay Outputs, USB/Serial/Ethernet
DTD-16 Plus – DTMF Decoder with Relay Outputs and USB
DTE-16 – DTMF Tone Encoder
Discontinued. Please see the DTE-16 Plus.
DTE-16 Plus – DTMF Encoder with Trigger Inputs and USB
The DTE-16 Plus is a feature rich DTMF tone/sequence encoder that is user programmable to encode tone sequences up to 15 characters in length or a single tone via any one of 16 contact closure/trigger inputs and/or commands from its USB COM port.